Delete Method; Delete Reagent; Delete Sequence; Demand: Locked - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®

Delete method

Delete reagent

Delete
sequence
Demand:
Locked
1. Select the method to be deleted.
2. Press 4.
3. Press ✓ to confirm or ESC to leave the menu with deleting.
It is not possible to delete a method which is part of a
sequence or coupled method. Remove the method from the
sequence or from the coupled method before deleting.
1. Select the reagent to be deleted.
2. Press 4.
3. Press ✓ to confirm or ESC to leave the menu with deleting.
It is not possible to delete a reagent which is used in another
method or sequence. Modify the method or sequence, e.g.
change reagent ID or remove the reagent, before deleting.
Deleting a sequence consists of removing all the methods present in
the sequence.
Refer to "Empty sequence", page
Electrode or Reagent calibration
The routine user is not allowed to bypass an electrode and/or reagent
calibration demand before continuing measurements. It means that
the electrode and/or reagent calibration periodicity has(have) been
elapsed.
QC sample analysis
If a QC sample periodicity has been reached, the next run of the
method must be performed on a QC sample.
Sequence edition
The routine user is not allowed to create, edit or delete sequence of
methods.
Enter in:
Setup menu > Access routine mode
TitraLab 870 Reference Manual
119.
Page 91