Results Menu; Rinse Aux. Output - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®

Results menu

Rinse aux.
output
Page 210
This menu displays the result identification parameters and
acceptance criteria required to run a sample method, an electrode or
a reagent calibration.
To access:
• Method: Method library > Edit method > Results (key 3).
• Reagents: Reagents library > Edit reagent > Results (key 3).
• Electrodes: Electrode library > Edit electrode > Results (key 3).
The Results menu for a sample method with 1 result and 1 equation
Option available when sample changer in use.
This command will set the auxiliary signal on during a programmed
rinse. For example, to clean the gas diffusion tip when using the
FRB560 Gas Flow Regulation Kit.
Enter in:
Setup menu > Configuration
Range available:
No, 5 V, or 12 V
TitraLab 870 Reference Manual