Table of Contents
Advertisement
TitraLab
®
Addition
method -
definition
Page 48
An Addition method performs 1 to 3 reagent additions. These
additions can be runned simultaneously or one after the other with or
without a delay between 2 additions. No measurements are per-
formed. An example of use is to place an Addition method in a
Coupled method before a Measurement method.
Programming an Addition method
1. In the Edit method menu, select Mode = Addition.
2. On the next line, enter the number of additions to be done (1 to 3).
For a 1-addition method
For a 2 or 3-addition method
Refer to "Addition method - programmation", page
TitraLab 870 Reference Manual
Select the addition reagent name.
Enter the reagent volume to be added (1 µl
to 999 ml)
Enter the delay to wait at the end of the
addition (00:00 to 99:59 min:s).
49.
Advertisement
Table of Contents
