Printouts - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®

Printouts

Printouts can be initiated automatically at the end of a test or manually
by pressing key Print from the following data screens:
• Main window: list of available methods.
• Reagent window: list of available reagents.
• Electrode window: list of available electrodes.
• Edit method menu: list of method parameters.
• Edit reagent menu: list of reagent parameters.
• Edit electrode menu: list of electrode parameters.
• GLP - Archives (methods) menu: sample results.
• GLP - Archives (reagents) menu: reagent calibration results.
• GLP - Archives (electrodes) menu: electrode calibration results.
• Sequence/Sample stack menu: sample stack of the sequence (for
each beaker: method type and ID, beaker number and ID).
• Beaker menu (while preparing a reagent calibration stack):
calibration stack (for each beaker: standard ID and batch number,
beaker number, sample quantity).
• Beaker menu (while preparing an electrode calibration stack):
calibration stack (for each beaker: buffer ID and batch number,
beaker number).
Automatic printouts
They contain the following information:
• Header: information entered in the Setup > Customise menu with
the instrument serial number and the date and time of analysis.
• Title of report: entered in Printouts menu, during method with the
method name (ID).
• Analysis ID: User ID and Sample ID entered at the start of the
titration.
• Footnote: appears automatically at the end of printouts.
• Calibration data (if relevant): electrode and reagent used to per-
form the titration.
• The calibration curve E = f(pC) of an ISE electrode (if
programmed in the Printouts menu of the calibration method).
• The direct curve and/or derivative curve of the titration (if
programmed in the Printouts menu of the method).
• The GRAN = f(volume) of an ISE standard addition method (if
programmed in the Printouts menu of the method).
• Titration/measurement results: obtained at the end of the
analysis with printout of the equivalent points (except for reagent
calibration) and an analysis counting number.
In automatic mode, the printout format depend on the High/
Medium/Low option selected for the Detailed parameter.
Refer to "Detailed", page
TitraLab 870 Reference Manual
93.
Page 177