Table of Contents
Advertisement
TitraLab
®
Number of
digits
Number of
dynamic rinses
Number of EP
Number of
equations
Page 164
Number of significant digits (1 to 5) to be displayed and printed for the
result calculated.
Example: If Number of digits = 4:
• 1456.1 is displayed "1456"
• 12.124 is displayed "12.12"
• 0.15872 is displayed "0.1587" (the first significant digit is "1")
• 0.4 is displayed "0.4000" (the first significant digit is "4")
Enter in:
Edit method > Results (for titration methods)
Edit reagent > Results
If a SAC850 or SAC950 Sample Changer is in use, enter the desired
number of dynamic rinses to be carried out before each beaker
analysis of a SAC sequence,
Enter in:
Setup menu > Configuration
Range available:
0 to 9
Number of end points (1 to 4) to be titrated to.
Only one end point is obtained during a back titration or a
reagent calibration.
Enter in:
Edit method > Method parameters menu (for End point method)
This is the number of extra results (0 to 2) to be calculated by the
method. These results are calculated using a user-programmed equa-
tion. This allows you to calculate the result in units which are not
available in the instrument.
Enter in:
Edit method > Results
TitraLab 870 Reference Manual
see also "Dynamic rinses", page
102.
Advertisement
Table of Contents
