TitraLab
®
Serial number
Setup menu
Page 230
Burette
The serial number is indicated on the burette and is entered during
the installation or replacement procedures.
Enter in:
Reagent library > Burette functions > Install burette.
Reagent library > Burette functions > Replace burette.
Format:
10 characters (one letter + 5 digits+ 1 dash '-' + 3 decimals).
Electrode
The serial number is entered when connecting or replacing an
electrode.
Enter in:
Electrode window > Install electrodes > Connect electrodes
Electrode window > Install electrodes > Replace electrode
Format:
10 characters
Press Stop 3 seconds or press key F12 in the Main window. The title
bar indicates the instruments name and the software version.
TitraLab 870 Reference Manual