Keyboard Connection - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®
Keyboard
connection
Connect an external mini-keyboard to the Titration Manager via the 6-
pin mini DIN port situated on the right hand side of the instrument.
Keyboard type: PCT or compatible with a 6-pin mini DIN connector.
Notebook Keyboard Mask, part no. X31T108 indicating the key-
A
board functions is available for use with the mini keyboards.
Refer to "Keyboard connection - Important", page
Keyboard functions
In combination with the Titration Manager (TIM) the keys of the PC
keyboard perform predefined functions. Refer to the table below.
PC keyboard TIM keys
<Print screen> Print
<Esc> Esc
<Pause> Stop
<Del> Del
Enter Check mark
<Up arrow> Up arrow
<Down arrow> Down arrow
<Left arrow> Left arrow
<Right arrow> Right arrow
Home -
<F1> -
<F2> -
<F3> -
<F4> -
<F5> -
<F6> -
<F7> -
<F8> -
<F10> -
<F11> -
<F12> Stop 3 s
TitraLab 870 Reference Manual
TIM operation
Printout data
Leave menus
Stop analysis
Deletion of a character. End a Start
timer delay or a Delay after
addition. Interruption of an analysis
with result calculation
Confirmation of an entry
Menu lines can be scrolled
Menu lines can be scrolled
Select a window
Select a window
Go to Main screen
Run analysis
Calibrate/Enter titre
Calibrate electrode
Select method or
Edit sample stack
Install reagent system
Install electrode system
Burette functions
Direct measurement
Select stirring speed-Cell menu
GLP - Archives (Sample)
Enter Setup menu
Figure 26: Keyboard functions
146.
Page 145