Run Window (Continued) - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®
Run window
(continued)
Page 214
Figure 35: Run window of a Measurement method (Conductivity)
Figure 37: ISE Standard addition method
To accept or reject a result,
TitraLab 870 Reference Manual
Sample name.
Method name.
Test number.
Electrode name and serial number.
Measurement stability indicator. Time elapsed
since measurements started. Temperature
measured (if a probe is used) or entered.
Conductivity live measurement corrected back
to the reference temperature displayed (if you
asked for a Linear or a Natural water
temperature correction) .
Sample name.
Method name.
Running test number.
Electrode name and serial number.
Measurement stability indicator. Time elapsed
since measurements started. Temperature
measured (if a probe is used) or entered
Concentration of the sample
(live measurement).
Figure 36: ISE Direct method)
Sample name.
Method name.
Running test number and type of the solution
being analysed (Sample = sample only,
Addition 1 = sample + 1 addition,
Addition 2 = sample + 2 additions, etc.,). The
additions are performed automatically. The
addition volumes are determined automatically
or are set by the user.
Electrode name and serial number.
Measurement stability indicator. Time elapsed
since measurements started. Temperature
measured (if a probe is used) or entered.
mV live measurement.
see "Result accepted (Yes/No)", page 205.