Create Electrode - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®

Create electrode

1. Enter the Electrode window.
2. Press 4 then 1.
3. Select the electrode function,
4. Press ✓ in the ID field.
5. Select From = Other.
The option From = Catalogue allows you to create an
electrode from a list of Radiometer Analytical electrodes.
6. Enter the electrode name (up to 16 alphanumeric characters).
7. In the Confirm creation screen:
• For pH, mV or ISE electrodes only; select the electrode type.
Refer to "Electrode type", page
• For combined pH or single pH electrodes; enter the internal pH
(pH int) of the electrode.
Refer to "pH int", page
• For combined pH, Metal/Redox or ISE electrodes or for a
Conductivity electrode; select if the electrode has a built-in
temperature sensor or not.
• For reference electrodes or combined pH, Metal/Redox, ISE
electrodes; enter the potential of the reference (in mV) versus the
Standard Hydrogen Electrode.
Refer to "Potential versus SHE", page
• For ISE electrodes only; enter the ion valency and molar weight
(in g/mol).
Refer to "Valency", page
• For conductivity cells only; enter the cable resistance (in Ω ) and
capacitance (in pF).
Refer to "Cable resistance", page
Refer to "Cable capacity", page
8. Press 1 to create the electrode. The Edit electrode menu is
displayed. Enter the electrode definition parameters.
TitraLab 870 Reference Manual
see "Electrode type", page
118.
170.
172.
253.
71.
70.
118.
Page 87