Programming Electrodes - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®

Programming electrodes

1.
Press 4.
4.
Select ID from Catalogue or
Others list.
Press 1 to confirm.
2.
Press 1.
5.
Press 1 to confirm the creation
of the new electrode.
TitraLab 870 Reference Manual
3.
Select function.
Select ID.
6.
For a combined or a simple
electrode or for a reference
electrode, enter the potential (in
mV) of the reference versus the
Standard Hydrogen Electrode
(SHE).
For a combined or a simple
electrode if you have selected
the Others list, enter the
internal pH of the electrode.
Enter the address of the elec-
trode.
Select Yes if a calibration is re-
quired, go to step 7.
Select No, for no calibration,
press Esc to leave the menu.
Programming is completed.
Page 25