Table of Contents
Advertisement
TitraLab
®
Run window
Follow the measurements on this window when an analysis is in
progress. The displayed information depends on the type of the
method which is running.
Enter in:
How to run an analysis?
Refer to "Running a method", page
Refer to "Running a TIM sequence", page
Refer to "Running a SAC sequence", page
Figure 33: Run window of a titration method (End point method)
Figure 34: Run window of a Measurement method (pH)
Refer to "Run window (continued)", page
TitraLab 870 Reference Manual
216.
218.
217.
Sample name.
Name of the method and time elapsed since
measurements started or remaining time until
end of the End point delay.
Running test number and temperature
measured (if a probe is used) or entered.
Volume of titrant dispensed and measurement
value (pH or mV).
Titrant delivery speed is displayed live.
Real time curve (pH or mV = f(dispensed
volume )).
Sample name.
Method name.
Test number.
Electrode name and serial number.
Measurement stability indicator. Time elapsed
since measurements started. Temperature
measured (if a probe is used) or entered.
pH live measurement.
214.
Page 213
Advertisement
Table of Contents
