TitraLab
®
Results
Page 208
The following results are displayed automatically at the end of a run.
pH calibration
Mean of zero pH (pH0(25))
Mean of sensitivity
ISE calibration
Mean of E0
Mean of sensitivity
Mean of Co detection limit concentration
Conductivity cell calibration
Mean of cell constant
Reagent calibration
Titre
Mean ± standard deviation
Measurement method
Measurement
Mean ± standard deviation
Titration method
Based on the volume found at the End point or Inflection point.
Mean and standard deviation for each of the defined result 1 to 8.
In End point, IP monotonic, IP dynamic and IP continuous modes, up
to 8 results and 2 user-defined equations can be calculated.
Results can be accepted or rejected at the end of each test per-
formed,
see "Result accepted (Yes/No)", page
TitraLab 870 Reference Manual
205.