Beaker Menu - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®

Beaker menu

Page 66
Use this menu to prepare a sample or calibration stack. It defines
individual data for all samples/standards used in the sequence.
Figure 11: Beaker menu (for a sample stack)
To access (for a sample stack):
1. Select Working mode = Sequence or SAC Sequence in the Main
window.
To get access to a SAC sequence, a Sample Changer must
be declared in the Configuration menu.
changer", page
2. Press 2 Sequence/Sample stack.
3. Press 1 Sample stack.
The sequence must have been edited in the Edit sequence
menu. Refer to "Edit sequence menu", page
Refer to "Sample stack", page
To access (for a reagent calibration stack):
1. Select Working mode = SAC Sequence in the Main window.
2. In the Reagent window, press 1 Calibrate/Enter titre.
3. Press 3 Calibration sequence.
The reagent calibration method must have been edited.
Refer to "Edit reagent menu", page
Refer to "Reagent calibration stack", page
To access (for an electrode calibration stack):
1. Select Working mode = SAC Sequence in the Main window.
2. In the Electrode window, press 1 Calibrate electrodes
3. Press 2 Calibration sequence.
The electrode calibration method must have been edited.
Refer to "Edit electrode menu", page
Refer to "Electrode calibration stack", page
TitraLab 870 Reference Manual
221.
225.
106.
Refer to "Sample
107.
192.
104.
113.