Table of Contents
Advertisement
TitraLab
®
Change
sequence name
1. Display the Main window.and select Sequence or SAC sequence.
If the SAC Sequence command is not available,
declare a Sample Changer (SAC80, SAC90, SAC850,
SAC950) in the Setup > Configuration menu
(Supervisor access only).
Refer to "Sample changer", page
2.
Press 2 Sequence/Sample stack
3. In the Sequence/Sample stack menu, select ID.
4. Enter the new name (16 characters maximum).
TitraLab 870 Reference Manual
221.
Page 77
Advertisement
Table of Contents
