Calculate With Ep No; Calculate With Ip No; Calibrate Electrodes; Calibrate Reagents - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®
Calculate with
EP no.
Calculate with
IP no.
Calibrate
electrodes
Calibrate
reagents
Calibration
curve of an ISE
electrode
Page 72
End point number (1 to Number of EP) for which the volume will
be used to calculate the result. Depending on the option selected for
Results by cumulate or difference, this will be the volume delivered
from the titration start to the end point no. "n" or the volume delivered
between the end points no. "n-1" and "n".
Enter in:
Edit method > Results
Inflection point number (1 to Number of IP) for which the volume
will be used to calculate the result. Depending on the option selected
for Results by cumulate or difference, this will be the volume delivered
from the titration start to inflection point no. "n" or the volume
delivered between the inflection points no. "n-1" and "n".
Enter in:
Edit method > Results
Refer to "Electrode calibration (conductivity)", page
Refer to "Electrode calibration (ISE)", page
Refer to "Electrode calibration (pH)", page
Refer to "Electrode calibration (SAC sequence)", page
Refer to "Reagent calibration", page
Refer to "Reagent calibration (SAC sequence)", page
This is the E = f (pC = -log C) curve obtained at the end of a
calibration cycle performed on an ISE electrode.
Displaying the calibration curve:
Refer to "Electrode calibration (ISE)", page
Printing the calibration curve:
The curve is printed out automatically at the end of each calibration
cycle if asked for in the Printouts menu of the calibration method,
see "Printouts setup", page
TitraLab 870 Reference Manual
109.
110.
189.
109.
179.
108.
111.
190.