Table of Contents
Advertisement
TitraLab
®
Nb lines per
page (printouts)
No curve
generation for a
reprocessing
No curve stored
within the
instrument
When printing page by page (
this parameter sets the maximum number of lines for one printed
page.
Access:
Setup Menu > Configuration
Range available:
26 to 255
Automatic mode reprocessing error: In the Coupled method, no
method is generating a curve before the method used to reprocess a
curve in automatic mode.
Review the Coupled method programmation.
Refer to "Reprocessing a curve (Automatic mode)", page
Manual reprocessing error: you are trying to reprocess in manual
mode a curve and there is no curve stored.
Reprocessing is not possible as a curve has to be stored in the
instrument.
Refer to "Reprocessing a curve (Manual mode)", page
TitraLab 870 Reference Manual
see "Format (printouts)", page
131),
202.
203.
Page 161
Advertisement
Table of Contents
