Table of Contents
Advertisement
TitraLab
®
Routine mode
Page 212
In "ROUTINE" mode the user is able to select and run methods.
Clear-text messages and icons present on the large graphic display
guide the user at every step. However, the routine user cannot create
or modify methods, reagents or electrodes.
When the working order is respected i.e. ELECTRODE then
TITRANT, you will be able to perform the following:
• RUN the active method,
• CONNECT the electrode system or CALIBRATE an electrode (if
required),
• INSTALL the reagent system, CHANGE THE REAGENT BOTTLE
and CALIBRATE a reagent (if required).
Refer to "User's rights", page
TitraLab 870 Reference Manual
252.
Advertisement
Table of Contents
