Add Method Menu - Radiometer Analytical TitraLab 870 Reference Manual

TitraLab ®
Add method
menu
Page 46
Use this menu to set the type (Sample, Blank, Electrode calibration,
Reagent calibration or QC sample) and ID of method to be added to a
sequence.
To access:
Press 1 in the Edit sequence menu.
In the title bar, x/y (eg. 1/1) indicates the position "x" of the method in
the sequence and "y" the total number of methods in the sequence.
When a sequence is created <1/1> is displayed.
Method type:
• Sample: measurement or titration method to be performed on
samples.
• Electrode calibration: calibration of pH or ISE electrodes,
calibration of conductivity cells.
• Reagent calibration: calibration of reagent using a titration method.
• Blank: titration method, edited with the Blank option, to be
perfomed on blank samples (usually, a solvent).
Refer to "Blank (Yes/No)", page
• QC: measurement or titration method, edited with the QC option, to
be performed on QC samples.
Refer to "QC sample (Yes/No)", page
Method ID:
Depending on the type selected above, select the method in the list
proposed.
To access:
Press 1 in the Edit sequence menu.
TitraLab 870 Reference Manual
67.
184.