TitraLab
®
Reprocessing a
reagent
calibration
curve
Reset memory
Reset to factory
settings
Page 204
Refer to "Reprocessing a curve", page
An internal error has occurred. Press ✓ . The Titration Manager resets
the parameters to default settings. The method, electrode and reagent
lists are reset to the preprogrammed list. All the results are lost.
Use this command to restore the methods, reagents and electrode
menu to factory settings. The method, reagent and electrode user lists
are reset to the preprogrammed lists.
A reset to factory settings is equivalent to a memory reset and
all the results and user entered methods are deleted.
Press 4 in the Setup menu and confirm the reset.
TitraLab 870 Reference Manual
200.