P R E L I M I N A R Y
GE
P
N
FN091065, R
ART
UMBER
8-9-5
Black and White Printer Replacement Procedure
Screws this side
not visible in
illustration
Black and White Printer
Figure 8-283 Screws Securing Black and White Printer in Compartment
5.) Using a small screwdriver, release the metal securing plate and slide it out of the compartment, as
shown in
6.) Disconnect the USB cable and the power cable from the rear of the Black and White Printer, as
shown in
Figure 8-285 Cables Disconnected from Rear of Black and White Printer
7.) Carefully push the Black and White Printer out of the compartment, while holding it firmly to prevent
it from falling.
8.) Remove the printer and place it on a flat, stable surface.
8-248
2
EVISION
Figure 8-284
below.
Figure 8-284 Removing the Securing Plate
Figure
8-285.
Section 8-8 - Software Loading
VS5 N
VS6 N
S
AND
ERVICE
(cont'd)
M
ANUAL