GE Vivid S5 N Service Manual page 661

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
8-6-5-4 BEP Removal Procedure
1) Remove the left and right side covers, as described in the
Procedure" on page 8-6
2) Remove the front cover, as described in the
3) Open and remove the cabinet cage assembly and place it on a stable surface, as described in
1 "Opening and Removing the Cabinet Cage Assembly" on page
4.) Remove the hard disk, as described in the
5.) Remove the battery, battery bracket and cable, as described in the
Procedure" on page 8-116
6) Cut the plastic cable tie wrap, as indicated in
.
7) Carefully disconnect the Keyboard cable from the BEP by removing the Phillips screw from the
bracket that holds the cable connector in place - see
take care not to damage the wires inside the cable).
2
EVISION
and 8-2-2-3 "Right Side Cover Removal Procedure" on page
and 8-6-3-4 "Battery Bracket Removal Procedure" on page
Figure 8-165 Location of Cable Tie
Figure 8-166 Keyboard Cable Fastened with Screw
Chapter 8 - Replacement Procedures
VS5 N
8-2-3-3 "Left Side Cover Removal
8-2-6-3 "Front Cover Removal Procedure" on page
8-109.
8-6-4-4 "Hard Disk Removal Procedure" on page
Figure 8-165.
Figure 8-166. (The Ground cable is on top, so
VS6 N
S M
AND ERVICE
8-5.
8-6-2-4 "Battery Removal
8-119.
Cable Tie
ANUAL
8-17.
8-6-
8-122.
8-135