GE Vivid S5 N Service Manual page 662

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
8-6-5 BEP Replacement Procedure
8) Proceed to disconnect the following cables from their connectors on the BEP (refer to
a.) Disconnect the Fan-to-BEP power cable
b.) Disconnect the RFI-to-BEP Flex cable
c.) Disconnect the DC/DC-to-BEP power cable
d.) Disconnect the USB cable
9) Loosen and remove the three screws that fasten the BEP to the cage assembly (see
8-136
2
EVISION
Figure 8-167 Cables Disconnected from the BEP
Figure 8-168 BEP Securing Screws
Section 8-6 - Lower Section Components Replacement Procedures
(cont'd)
VS5 N VS6 N
S
AND
ERVICE
Figure
USB Cable
Keyboard Cable
DC/DC-to-BEP Cable
RFI-to-BEP Cable
Fan-to-BEP Cable
Figure
M
ANUAL
8-167):
8-168).