GE Vivid S5 N Service Manual page 252

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
c.) The current path information is displayed below the Patient List as well as number of studies,
d.) Select the required exam or exams, as shown in
e.) (Use Ctrl +click to select more than one study; Shift + click to select a group of studies)
f.) The currently-selected exams are now highlighted in the list and, as shown in
g.) The three study management buttons are now as follows:
h.) Delete Selected Patients - enabled
i.) Copy Selected Patients and Move Selected Patients - remain disabled until at least one Study
j.) To copy or move the selected exams, first click the Browse button and select the required
k.) (If necessary, click the Review Destination folder button to review the destination folder Patient
l.) During the copy or move operation, the relevant message and progress bar is displayed:
3-176
2
EVISION
cumulative size and amount of space available on the drive. By default, the destination path
Other Folder radio button is enabled.
Figure 3-205 Exams Selected
the cumulative size of the 3 studies is displayed below.
has been selected and the Destination Path has been specified (providing the destination is
NOT read-only media [such as, CD/DVD-ROM]). Only when both these tasks have been
performed will these two buttons become enabled.
destination folder, then click the Copy Selected Patients or Move Selected Patients button
as appropriate.
List).
Section 3-4 - Preparing for Installation
VS5 N VS6 N
AND
Figure 3-205.
S M
ERVICE ANUAL
Figure 3-205,