GE Vivid S5 N Service Manual page 243

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
The E-mail Dialog box is displayed.
2) Activate the Send Current Image radio button, then click Next.
Note: If it is necessary to send the MPEGVue Player software to the recipient, first complete this
procedure, then proceed to
The E-mail address window is displayed.
3) Select an existing recipient address from the drop-down menu, or type a new address in the
Send To field.
Note: Up to 10 addresses can be stored for future selection.
4) Click Next.
The E-mail (addressed to the selected addressee) with the image is sent to the Outbox; during this
operation a progress window is displayed:
2
EVISION
Figure 3-191 E-mail Dialog Box
'Sending the MPEGVue Player Software by E-mail" on page
Figure 3-192 E-mail Address Window
Figure 3-193 Sending Message to Outbox Progress Window
Chapter 3 - System Setup
VS5 N VS6 N
S
AND ERVICE
3-168.
M
ANUAL
3-167