GE Vivid S5 N Service Manual page 383

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
6-1-3 Keyboard Adjustments
6-1-3-1 Backlighting Intensity Adjustment Procedure
To make adjustments to the Keyboard Backlighting intensity, follow the procedure described in
"Adjust Keyboard Backlight Intensity" on page
6-1-4 Trackball Speed Setting
The following is the procedure for setting the correct trackball speed:
1.) From the Windows® Start button, select Settings > Control Panel.
2.) From the Control Panel, double-click Mouse.
3.) Select the Pointer Options tab.
Enhance pointer precision - not
checked
Figure 6-10 Checking the Pointer Speed Prior to a Software Upgrade
4.) Under Motion, note the pointer speed.
5.) After completing the software installation (as described in the
Overview" on page
6.) Verify that the Enhance pointer precision box is not checked.
6-1-5 Beamformer Calibration
6-1-5-1 Beamformer Calibration Procedure
For details on Beamformer Calibration adjustments, refer to
2
EVISION
8-207), reset the pointer speed to the setting as noted in
Chapter 6 - Service Adjustments
VS5 N
3-86.
"Software Upgrade Procedure
Chapter 7 -
VS6 N
S M
AND ERVICE
3-6-2-3
Pointer speed
step 4, above.
Diagnostics/Troubleshooting.
ANUAL
6-9