GE Vivid S5 N Service Manual page 400

Hide thumbs Also See for Vivid S5 N:

P R E L I M I N A R Y

7-2-4-3-6 Battery Parameters Test

The Battery Parameters Test is used to check the battery status with regard to the following:

For test procedure instructions, see

7-2-4-3-7 Tx Voltages Test

The TX Voltages Test is used to test the transmit part of the power supply to make sure that the

Tx voltage is within expected values.

For test procedure instructions, see

The BEP Tests are performed to check of the various Back End hardware components, as outlined

below. The procedures are described in detail in the

the System" on page

Battery capacity

Charging voltage being supplied to the battery (or the voltage being supplied by the battery)

Source of the power being provided to the system (i.e. external power via the AC/DC or via the

battery [indicating the battery is either being charged or discharged]).

Section 7-2 - Diagnostics

7-5-1-6 "Battery Parameters Test" on page

7-5-1-7 "Tx Voltages Test" on page

Section 7-6 "Performing Back End Diagnostics on

Show Quick Links