P R E L I M I N A R Y
GE
P
N
FN091065, R
ART
UMBER
The Search/Create Patient dialog box opens.
2.) Type the patient's Last Name and ID in the appropriate fields (see
3.) Select the Dataflow you intend to use for this patient's information (in this case, select Local
Archive – Int HD/eVue as shown in
4.) Using the soft key buttons, select NEW PATIENT.
5.) Now start scanning. Each image you would like to store press the STORE button.
A few seconds after the Store button is pressed, images will be transferred into the remote
computer (which was previously set as the destination - refer to
6.) To proceed, follow to the instructions as described for
on page
3-144
2
EVISION
Figure 3-165 Search/Create Patient Dialog Box
3-161.
Section 3-4 - Preparing for Installation
Figure
3-165).
'Using MPEGVue Viewer on a Remote PC"
VS5 N
VS6 N
S
AND
ERVICE
Figure
3-165).
Figure 3-164 on page
3-142).
M
ANUAL