GE Vivid S5 N Service Manual page 698

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
8-6-13 Sub-woofer Assembly Replacement Procedure
8-6-13-1 Tools
Use the appropriate flat and Phillips-type screwdrivers and a wire cutter as indicated in the
Sub-woofer replacement procedure.
8-6-13-2 Preparation
Shut down the Vivid S5 N or Vivid S6 N ultrasound unit, as described in
page 4-7.
8-6-13-3 Sub-woofer Removal Procedure
1) Remove the system left and right side covers, as described in the
Procedure" on page 8-6
2) Remove the system front cover, as described in the
3) Disconnect the D-Type power cable from the DIB (see
4) Disconnect the Sub-woofer cable from the cable connection on the AC Distribution box - refer to
Figure
5.) Loosen the two screws securing the Sub-woofer to the top of the AC Distribution box.
8-172
2
EVISION
and
8-215.
Figure 8-215 Sub-woofer Cable Connection
Figure 8-216 Loosening the Securing Screws
Section 8-6 - Lower Section Components Replacement Procedures
"Right Side Cover Removal Procedure" on page
"Front Cover Removal Procedure" on page
VS5 N VS6 N
AND
4-2-3 "Power Shut Down" on
"Left Side Cover Removal
8-5.
Figure 8-215).
D-Type power cable
Disconnect Sub-woofer cable here
S M
ERVICE ANUAL
8-17.