GE Vivid S5 N Service Manual page 569

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
8-3-4 Keyboard Assembly Replacement Procedure
When the installation process is complete, the following screen is displayed:
14.)Press Set on the keyboard, eject the CD, and reboot the system.
15.)With the system up and running, press Alt + L.
The Front Panel Lights Setup dialog box opens - see
16.)Set the AlphaNUM Lights as follows:
a.) Select the sliding indicator and slide it to its extreme left position.
b.) With the slide indicator still selected, press the right arrow on the keyboard 3 times to get to
17.)For the remaining panel lights setup, set each of them about halfway on the scale to reach the
settings as shown in
18.)Press Save and Press exit to return to the default scanning screen.
19.)Proceed to perform the following functionality tests:
-
-
-
-
-
-
-
2
EVISION
Figure 8-53 Front Panel Lights Setup Dialog Box
the position as shown in the above picture.
Figure 8-53.
"Alphanumeric Keyboard Test" on page 4-18
"Extended Keyboard and Trackball Test" on page 4-18
"Speakers Tests" on page 4-21
"Light Detector Test for Vivid S6 N only" on page 4-22
"USB Test" on page 4-37
"Grounding Continuity" on page 10-23
"Chassis Current Leakage Test" on page 10-24
Chapter 8 - Replacement Procedures
VS5 N VS6 N
AND
(cont'd)
Figure 8-53.
S M
ERVICE ANUAL
8-43