GE Vivid S5 N Service Manual page 651

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
To identify which hard disk is installed on your system, boot up the system and enter the BIOS
configuration as described in
The hard disk is identified by the Primary Master: ST9500325AS-(PM) - see
8-6-4-5-1 Formatting the Hard Disk
1.) Insert the Format Utility disk into the CD drive and boot up the system.
The following sequence of screens is displayed:
2.) Type the password: "geulsservice" and press Enter.
The following message is displayed
The following window displays:
3.) Press any key.
The system ejects the CD.
4.) Remove the CD from the CD drive.
2
EVISION
"Setting the BIOS" on page
Figure 8-155 BIOS Main Screen
Chapter 8 - Replacement Procedures
VS5 N VS6 N
AND
8-228.
Figure
S M
ERVICE ANUAL
8-155.
8-125