GE Vivid S5 N Service Manual page 435

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
7-4-4 TR 32 Diagnostic Tests
The System BF Digital Test commences. While the test proceeds, the name of the test currently in
progress (System BF Digital Test) is displayed in the Execute field and the current Loop # and
specific test are shown below. The messages Init Done and Please Wait are displayed beside the
progress bar in the Status area.
As the testing sequence progresses, the progress bar will advance to reflect the test progress. Status
indicators in the Data Flow map corresponding to the various system components will be highlighted in
the appropriate color to indicate the current test status, as follows:
•
•
•
6.) At any stage, trackball to the Pause button and press Set, if required.
7.) To resume testing (from the point where you paused), trackball to the Start button and press Set.
When the System BF Digital Test sequence is complete:
-
-
8.) If necessary, use the scroll bars and/or arrows to scroll through the list of Test results.
NOTE: For this test, there are two reports (MLA0 and MLA1) which is listed in Reports on the right. By
default, the MLA0 report is displayed in the Reports window below
- System BF Digital Test (MLA0)" on page
9.) To view the MLA1 test results, select MLA1 test results under Reports.
The MLA1 test results are displayed in the Report Window, as shown below.
2
EVISION
Green: All recommended tests for these components have been completed and no problems
were identified.
Red: Problems were identified in these components during the performance of the test.
Yellow: The tests executed so far on these components have passed, but not all
recommended tests have been performed.
the Diagnostic Test window displays the Finished message
the View Test Log window opens automatically, listing all tests performed and showing details
of which tests passed or failed, as shown in the example in
System BF Digital Test (MLA0)" on page
Figure 7-26 View Test Log - System BF Digital Test (MLA0)
Chapter 7 - Diagnostics/Troubleshooting
(cont'd)
7-51.
7-51).
VS5 N VS6 N
S
AND ERVICE
Figure 7-26 "View Test Log -
(Figure 7-26 "View Test Log
M
ANUAL
7-51