GE Vivid S5 N Service Manual page 258

P R E L I M I N A R Y
GE
P N FN091065, R
ART UMBER
IMPORTANT To avoid system configuration inconsistencies, before using the Enable eVue or
NOTICE
Disable eVue functions, make sure that your PC is connected to the appropriate network and
that all network cables are properly connected. Otherwise, configuration of your PC may
become incorrect and the Configuration utility will be unable to execute the Enable eVue or
Disable eVue operations.
In cases of a peer-to-peer connection, before using Enable eVue always make sure the two
computers (Vivid S5 N or Vivid S6 Nscanner and your PC) are properly configured and
connected directly.
Before using Disable eVue, your PC should be connected back to the local network.
j.) Click the Enable eVue button to activate the eVue operation.
k.) The following message is displayed:
l.) Click OK to close the message.
Note: The Disable eVue button is now active.
m.) When required, click the Disable eVue button to de-activate the eVue operation.
n.) The following message is displayed:
3-7-9-3-13 Using MPEGVue Player
1.) On the remote computer, open the media (CD or Memory Stick) containing the MPEGVue files, or
the folder which was set as being shared for import of eVue files.
2.) On the remote computer, open the folder which was set as being shared for import of eVue files.
3-182
2
EVISION
Section 3-4 - Preparing for Installation
VS5 N VS6 N
S
AND
ERVICE
M
ANUAL