Complete Hardware Guide for EX2200 Ethernet Switches
Rear brackets
Related
Documentation
60
Figure 19: Mounting the Switch to the Front Posts in a Rack
Side-rail
bracket
Have a second person secure the front of the switch to the rack by using the appropriate
7.
screws for your rack.
Slide the rear brackets into the side-rail brackets. See Figure 20 on page 60.
8.
Figure 20: Sliding the Rear Brackets to the Rear of a Four-Post Rack
Attach the rear brackets to the rear post by using the appropriate screws for your rack.
9.
Tighten the screws.
Ensure that the switch chassis is level by verifying that all the screws on the front of
10.
the rack are aligned with the screws at the back of the rack.
Connecting Earth Ground to an EX Series Switch on page 67
Connecting AC Power to an EX2200 Switch on page 73
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 87
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 89
Mounting an EX2200 Switch in a Recessed Position in a Rack or Cabinet on page 61
Switch
Front
bracket
Switch
Side-rail
bracket
Copyright © 2010, Juniper Networks, Inc.