Register Products-Mandatory To Validate Slas; Mount An Ex4100 And Ex4100-F Switch On Two Posts In A Rack Or Cabinet - Juniper EX4100 Hardware Manual

Table 41: Inventory of Components Provided with EX4100-F-24P, EX4100-F-24T, EX4100-F-48P, and
(Continued)
EX4100-F-48T models
Component
RJ-45 cable and RJ-45-to-DB-9 serial port adapter
Documentation Roadmap/Warranty Card
Juniper Networks Product Warranty
End User License Agreement
Register Products—Mandatory to Validate SLAs
Register all new Juniper Networks hardware products and changes to an existing installed product using
the Juniper Networks website to activate your hardware replacement service-level agreements (SLAs).
CAUTION: Register product serial numbers on the Juniper Networks website. Update
the installation base data if any addition or change to the installation base occurs or if
the installation base is moved. Juniper Networks is not responsible for not meeting the
hardware replacement service-level agreement for products that do not have registered
serial numbers or accurate installation base data.
Register your product(s) at
Update your installation base at
updateinstallbase.jsp.
Mount an EX4100 and EX4100-F Switch on Two Posts in a Rack or
Cabinet
Before mounting the switch on two posts in a rack:
• Verify that the site meets the requirements described in
Specifications for EX4100 and EX4100-F Switches" on page
Quantity
1
1
1
1
https:/ /tools.juniper.net/svcreg/SRegSerialNum.jsp.
https:/ /www.juniper.net/customers/csc/management/
"Environmental Requirements and
88.
123