Clean The Jet - Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual

Clean the Jet

OPERATING SEQUENCE
Clean the Jet
Materials needed
•
•
•
•
•
•
•
•
WARNING! This operation must be carried out at low temperature to avoid burns. Therefore,
before beginning the sequence, the detector must be cooled to room temperature.
PRECAUTIONS
WARNING! When handling organics solvents you must take precautions to avoid health
hazards. Refer to Appendix B,
Maintenance and Troubleshooting Manual
Screwdriver
Tool for extracting the jet (P/N 205 019 00)
Forceps or tweezers
Ultrasonic cleaning bath
Liquid detergent
Clean compressed air
GC-grade methanol
Clean paper towel
Maintaining a Nitrogen Phosphorus Detector
Reagents Safety Information
Chapter 13
for more information.
243