Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual page 50

Chapter 2
Maintaining a Split/Splitless Injector
9. Disconnect the split line tubing from the
injector body and from the split line filter.
a. Using the 7/16" wrench, unscrew and
disconnect the split line tubing from the
injection body.
b. Using two 8-10 mm wrenches, unscrew and
disconnect the split line tubing from the split
line filter.
10. Remove the split line tubing from the GC.
50
Replace the Split Line Tubing
Maintenance and Troubleshooting Manual
a
b