Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual page 93

Replace the Rotary Valve Seal
20. . Fix the OC head on the ceiling of the GC and
tighten the two screws A on the side of the OC
head previously loosened.
21. .Reinstall the automatic actuator on the OC
housing paying attention to insert the valve
lever through the slot provided on the automatic
actuator shaft.
Place the automatic actuator paying attention to
not crush the cables under it.
Maintenance and Troubleshooting Manual
Maintaining a Cold On-Column Injector for Standard Automatic Injections
A
Chapter 4
93