Wipe Test - Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual

Hide thumbs Also See for TRACE GC Ultra:

Table of Contents

Wipe Test

Before leaving the factory, each ECD is leak tested for surface radio

contamination by means of the Wipe Test method. Each detector is provided with

a Wipe Test Certificate reporting the results of the values found and the

procedure followed.

The users of the ECD detector in the United States are required to perform a Wipe Test on

their ECD at intervals not exceeding 3 years (36 months), following the reported procedure.

For other Countries, please refer to the appropriate agency for equivalent requirements.

Maintenance and Troubleshooting Manual

Maintaining an Electron Capture Detector

Table of Contents