Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual page 108

Chapter 5
Maintaining a Cold On-Column Injector Direct Narrow-Bore
22. .Adjust the position of the automatic actuator
up to align the fixing holes provided on the
actuator body with the corresponding fixing
holes located on the fixing arm of the OC head.
Fix the parts by using the two fixing screws.
23. Reconnect the ground wire coming from the
actuator motor
24. .Reconnect the cables coming from the actuator
and the TriPlus sampler to the control interface.
25. Reposition the injector/detector cover.
26. Press LEFT CARRIER or RIGHT CARRIER,
depending on which injector is operating, scroll
and press ON.
to
Pressure
27. Switch on the TriPlus sampler.
108
Replace the Rotary Valve Seal
Maintenance and Troubleshooting Manual