Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual page 283

Hide thumbs Also See for TRACE GC Ultra:

Table of Contents

Clean the Mirror Metal Plug

1. Press LEFT DETECTOR or RIGHT DETECTOR,

depending on the location of the FPD detector,

to access the FPD control table. In the

following example, a FPD installed on the right

channel is considered.

and press OFF.

2. Scroll to

3. Scroll subsequently to

4. Switch off the GC power supply.

WARNING! Before disconnecting the cables

or disassembling the detector,

switching off the GC power

supply is indispensable to avoid

electrical shocks and damages

to the instrument.

5. Disconnect the signal, excitation voltage and

ignition/heating cables from the detector.

Maintenance and Troubleshooting Manual

Base temp,FPD

and press OFF.

Maintaining a Flame Photometric Detector

RIGHT DET (FPD)

High voltage mode?

Chapters

Table of Contents