Replace The Silver Seal; Ecd) - Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual

Replace the Silver Seal (FID on ECD)
OPERATING SEQUENCE
Replace the Silver Seal (FID on ECD)
Materials needed
•
•
•
WARNING! Any maintenance or repair operations involving the radioactive source of the ECD
must be performed ONLY by qualified personnel duly authorized to handle
radioactive material. Please contact your local Thermo Fisher Scientific Technical
Service office.
WARNING! This operation must be carried out at low temperature to avoid burns. Therefore,
before beginning the sequence, the detectors must be cooled to room temperature.
PRECAUTIONS
Press AUX.
1.
2. Scroll to
Detector
Maintenance and Troubleshooting Manual
Silver seal (P/N 290 150 58)
ECD fixing tool (P/N 205 021 50)
Tweezers
and press ENTER.
Maintaining Detectors in Stack Configuration
AUXILIARY
Signal
Detector
Temperature Zones
Pressure Channel
Chapter 17
.
<
369