Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual page 90

Hide thumbs Also See for TRACE GC Ultra:

Table of Contents

Maintaining a Cold On-Column Injector for Standard Automatic Injections

10. Unscrew the two Allen bolts that fix the injector

body to the injector base. Remove the injector

body from its base.

Pay attention not to lose the

small needle guide when

removing the injector body. The

guide normally can be found

inserted in the needle channel

of the injector base or of the

11. Disassemble the injector body, separating the

head from the lower part.

Replace the Rotary Valve Seal

Maintenance and Troubleshooting Manual

Chapters

Table of Contents