Table of Contents
Advertisement
Clean the Jet
6. Using the tool provided with the GC, unscrew
the metal jet.
7. Place the jet in the ultrasonic bath filled with
liquid detergent and clean it for about five
minutes.
8. Handling the jet with forceps or tweezers, rinse
the jet with distilled water, then with methanol.
9. Place the jet on a paper towel and let it air dry.
PRECAUTIONS
Maintenance and Troubleshooting Manual
Maintaining a Nitrogen Phosphorus Detector
Chapter 13
245
Advertisement
Chapters
Table of Contents
Troubleshooting
