Thermo Scientific TRACE GC Ultra Maintenance And Troubleshooting Manual page 279

Hide thumbs Also See for TRACE GC Ultra:

Table of Contents

Clean the Interferential Filter

4. Switch off the GC power supply.

WARNING! Before disconnecting the cables

or disassembling the detector,

switching off the GC power

supply is indispensable to avoid

electrical shocks and damages

to the instrument.

5. Disconnect the signal, excitation voltage and

ignition/heating cables from the detector.

Maintenance and Troubleshooting Manual

Maintaining a Flame Photometric Detector

Chapters

Table of Contents