Table of Contents
Advertisement
Chapter 2
Maintaining a Split/Splitless Injector
16. Reinsert the silver seal and the terminal fitting.
17. Tighten the nut that retains the terminal fitting.
18. Insert the analytical column with its ferrule into
the bottom of the injector in its previous
position (for instructions, refer to the TRACE
GC Operating Manual).
19. Tighten the M4 retaining nut to hold the column
in place.
44
™
Maintenance and Troubleshooting Manual
Replace a Broken Liner
Advertisement
Chapters
Table of Contents
Troubleshooting
