Menus
Self Test and Status Screen
Thermo Scientific
In most cases, where possible, small arrows are shown on the currently selected
item to indicate possible choices of direction. In the example below, on the selected
menu tab, you can go L
selected menu's items. For some menu items, you can use L
the value.
Figure 12: Navigation through the menu
Selected items are indicated by increased contrast versus the individual color of
each main menu. The B
When the RIIDEye is first powered on, you will see a screen that shows the results of
an initial Power-On Self-Test (POST). A properly functioning unit will have a display
similar to that shown in
Figure 13: Successful POST screen
The self test reports the following information:
1. Internal firmware version in the upper right corner
2. Power supply test results
3. Main board test results
4. Internal RIIDEye temperature
5. Expected battery life remaining (if not connected to AC power)
12/22/2016
or R
through the menu choices or D
EFT
IGHT
key takes you back to the higher level menu.
ACK
Figure
13, although the internal case temperature may vary.
OWN
and R
EFT
RIIDEye DB-099E Operator Manual
1
into the
to change
IGHT
12