Scanner Mode - Intermec Janus 2020 User Manual

Scanner Mode

Purpose: Defines how the scanner operates when the trigger is pulled. There are two
types of modes:
• One-Shot mode requires you to pull the trigger each time you want to scan
• Automatic mode allows you to pull the trigger once and scan a series of bar
Default: One-Shot mode
Syntax: SBdata
Acceptable values for data are:
0
1
Scan: One of these bar codes:
Enable One-Shot Mode
*$+SB0*
*$+SB0*
Enable Automatic Mode
*$+SB1*
*$+SB1*
NF
a bar code. Once you scan a bar code, the scanner turns off.
codes. When you release the trigger, the scanner turns off. To scan the same
bar code more than once, you must release the trigger or scan a different
bar code before attempting a second scan.
One-Shot mode
Automatic mode
BC
Configuration Command Reference
12
12-85