Problems Transmitting Data Through The Serial Port; Problems Transmitting Data Through The Dcs 30X Or G4000 - Intermec CK30 User Manual

Problems With RF Connectivity (continued)
Problem
The network connection icon is in the
status bar, but you cannot establish a
terminal emulation session with the host
computer.
The network connection icon is in the
status bar, but the host computer is not
receiving any data from the CK30.

Problems Transmitting Data Through the Serial Port

If you are having problems sending or receiving data through the
integrated I/O port on the terminal, check these possible
problems:
• Make sure the terminal is connected to the PC, host
computer, or RS-232 serial device using the appropriate
cable.
• If the terminal is in a communications dock, make sure that
the communications dock is connected to the serial device
using the appropriate cable.

Problems Transmitting Data Through the DCS 30X or G4000

Problem
Transaction Buffer Full.
CK30 Handheld Computer User's Manual
Chapter 4 — Troubleshooting and Maintaining the CK30
Possible Solution
There may be a problem with the host computer, a
problem with the connection between the G4000 and
the host computer, or a problem with the connection
between the access point and the host computer. Check
with your network administrator to make sure the host is
running and allowing users to login to the system.
In a UDP Plus or WTP network, there may be a
problem with the connection between the G4000 and
the host computer. Check with your network
administrator or see the user's manual for the G4000.
In a TCP/IP network, there may be a problem with the
connection between the access point and the host
computer. Check with your network administrator or
use your access point user's manual.
Solution
The buffer holding transactions to be sent to the DCS
30X or G4000 is full. Stop collecting data with this
terminal. Make sure the terminal is communicating with
the DCS 30X or G4000 and let the terminal send all the
transactions in the buffer before you continue collecting
data.
63