Configuring Parameters; Configuring The Computer With Intermec Settings; Synchronizing The Computer System Time With A Time Server - Intermec CN3 User Manual

Configuring Parameters

Configuring the Computer With Intermec Settings

Synchronizing the Computer System Time with a Time Server

CN3 Mobile Computer User's Manual
5 Copy the AutoRun.dat file to the "\SYSTEM" folder on your CN3.
During every boot, the system scans for AutoRun.dat in the "\SYSTEM"
folder.
Here is a sample AutoRun.dat file that runs a dialer application and
connects to a VPN:
EXEC "\Program Files\My Dialer\Dialer.exe" 348-2600
EXEC "\Program Files\My VPN\Connect.exe" MyDomain
You can configure many parameters on the CN3, such as the bar code
symbologies it decodes or the network settings. These characteristics are
controlled by configuration parameters. The values you set for these
configuration parameters determine how the computer operates. Use
configuration commands to configure the CN3.
Use Intermec Settings to configure the CN3 and view system information.
You can access Intermec Settings while running any application.
To access Intermec Settings
• From the CN3 desktop, select Start > Settings > the System tab > the
Intermec Settings icon.
For detailed information on most of the commands available in Intermec
Settings, see the Intermec Computer Command Reference Manual (P/N
073529) via the Intermec web site. Go to
information.
It is important that the time on all of your CN3s be synchronized with a
network time server to ensure real-time communications and updates.
Network time servers acquire Coordinated Universal Time (UTC) from an
outside source such as the U.S. Naval Observatory (USNO). The CN3 uses
Chapter 3 — Configuring the Computer
"Before You Begin" for access
93