Table of Contents
Advertisement
2-30
Idle Speaker Mode
Programming Steps
1. Press the IDLE SPEAKER MODE flex button (FLASH 05, Button #10).
2. Enter a 0 or 1 that corresponds with the following entries:
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The Idle Speaker Mode feature determines whether the first digit dialed is
heard over the digital key telephone speaker. This feature can be enabled
or disabled on a system-wide basis. By default, this mode is disabled.
Call Cost Display
Programming Steps
1. Press the CALL COST DISPLAY flex button (FLASH 05, Button #11).
2. Enter a 0 or 1 that corresponds with the following entries:
3. Press HOLD to save the entry. A confirmation tone is heard.
Description
The Call Cost Display feature lets a user view the approximate cost of
each call made. This approximate cost also prints as part of the SMDR
record. The Call Cost Display replaces the call duration display when a call
is made using LCR. Cost information is programmable in LCR Flash 75.
This enables users to program four separate costs based on time of day.
[0] = First digit dialed is Heard (Disabled)
[1] = First digit dialed is Muted (Enabled)
ID LE SP EA KE R MOD E
D ISA BLE D
[0] = Disabled
[1] = Enabled
CAL L COS T DIS P LAY
D ISA BLE D
System Features 1 Programming
0- 1
0- 1
Advertisement
Table of Contents
